Dwyer Differential Pressure Gauge

 

Range W.C	Part #		Range W.C.	Part #
.05-0-.2	2000-00N		0-30	2030
0-.25	2000-00		0-40	2040
0-.50	2000-0		0-50	2050
0-1.0	2001		0-60	2060
0-2.0	2002		0-80	2080
0-3.0	2003		0-100	2100
0-4.0	2004		0-120	2120
0-5.0	2005		0-150	2150
0-6.0	2006		.25-0-.25	2300-0
0-8.0	2008		.5-0-.5	2301
0-10	2010		1-0-1	2302
0-12	2012		2-0-2	2304
0-15	2015		5-0-5	2010
0-20	2020		10-0-10	2320
0-25	2025		15-0-15	2330

SPECIFICATIONS:
Service: Air and non-combustible, compatible gases. (Natural Gas option available.)
Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: +/- 2% of full scale (±3% on - 0 and ±4% on - 00 ranges), throughout range at 70°F. (21.1°C)
Pressure Limits: -20½ Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 kPa), standard gages only.
Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).
Size: 4½ (101.6 mm) Diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8½ female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight: 1 lb. 2 oz. (510g), MP & HP 2 Lb. 2 oz. (963g).
Standard Accessories: Two 1/8” NPT plugs for duplicate pressure taps, two 1/8” pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP& HP gage accessories.)

*Low temperature models available as special option. 

 Click Here for the Dwyer 2000 Series Cut Sheet